Measuring fields:
CO from 0 to 9.99 % Res. 0.01
CO2 from 0 to 19.9 % Res. 0.1
HC hexane from 0 to 13999 ppm Res. 1
O2 from 0 to 24.99 % Res. 0.01
NOx from 0 to 4999 ppm Res. 10
Lambda from 0.5 to 2 Res. 0.001
Revs from 300 to 9990 revs/min Res. 10
Oil Temp from 20 to 150 °C Res. 1
Measuring gas suction 4 l/min.
Automatic and continuous condensate draining
Semiautomatic tightness test
Automatic flow control
Automatic control of spent O2 sensor
Automatic compensation of ambient pressure from 850 to 1050 mB
Automatic calibration (with sample gas bottle)
Automatic autozero
Heating time to 20 °C 10 minutes.
IR channels response time < 10 s.
O2 response time < 60 s.
RPM and temperature reception via radio or via EOBD socket (with AD 7100 accessory)
Oil temperature input through PT100, or via wireless radio EOBD (with AD 7100 accessory)
Serial port link RS 232
Serial network link RS 485
Power supply 11 ÷ 15 Volt DC
Consumption 1.5A
Operating temperature from 5 °C to 40 °C
Dimensions 220 x 140 x 430 mm
Weight 5 Kg
1 – Are the Analyzers and Smokemeters MCTCNET2-type approved?
All of the Brain Bee analyzers and smokemeters will be MCTCNET 2 – type approved as soon as the Ministry will be able to do it (probably not before October 2010). New tools will be released with MCTCNET 2 type-approval, while the tools sold earlier will have to be fitted with a hardware key and a new software. Costs will be in any case quite low.
2 – Can the gas line be interfaced with Bluetooth?
Yes, in several ways, in any case always with the introduction of the Bluetooth BT100 modules. A tool configuration with PS170 supplier module is also available making the whole setup completely independent and wireless.
3 – Does it require special maintenance?
The manufacturing quality and the selection of materials give Brain Bee tools excellent operating reliability.
Ask a Question Form
Description
OFFICIAL VEHICLE INSPECTION TESTS AND FOR BLUE QUALITY-GUARANTEE STICKER
In accordance with Decreto DM/628 and successive circulars, AGS-200 enables you to carry out the official test in the vehicle inspection procedure.
CARBURATION CURVE
It automatically memorises the value of the gases at different engine revolutions and displays the carburation curve. Particularly recommended for road tests or tests with power test bench.
AUTOMATIC DIAGNOSIS
The software compares the gas values and provides the operator with a list of possible causes of the engine’s poor functioning.
CATALYTIC CONVERTER EFFICIENCY
The software guides the operator through the test and provides the catalytic converter’s percentage efficiency each gas analysed both before and after the said converter.
DOUBLE LAMBDA SENSOR TEST
Using the oscilloscope function it analyses the variations in the signal and provides an operating efficiency value.
CYLINDER-HEAD TIGHTNESS TEST
The software guides the operator through the test and by analysing the gases inside the cooling liquid bottle is able to establish whether there are any infiltrations from the cylinder-head gasket.
HEATING EFFICIENCY TEST
By memorising the values of the gases for 30 minutes, the software is able to establish whether the auxiliary starter elements and temperature elements are working correctly.
CERTIFICATION
– Conforms to ISO 3930/OIML class 0
– MID 2004/22/CE
– DM 628/96 and successive circulars
– AU 4 (Germany)
– MOT (UK)
– Austria
– PCT-Gosstandart of Russia (Russia)
– BRML (Romania)
– OMH (Hungary)
– Bulgaria
– Czech Republic
– ARAI (India)
Conforms to the MCTCNET communication protocol
Metrological Book included